Dishwasher Filter how to clean

Whirlpool Dishwasher Filter How To Clean

Whirlpool dishwasher filter how to clean is the article in which we will explain to you how to clean a whirlpool dishwasher filter. We are sure that this article will completely guide you about dishwasher filter cleaning.

Cleaning the dishwasher filter is a necessary task, but it’s not always easy to know how to do it properly. That’s why we’ve created this step-by-step guide to show you exactly how to clean your whirlpool dishwasher filter.

Take a few minutes to read through this guide, and you’ll be able to clean your dishwasher filter in no time.

Whirlpool Dishwasher Filter How To Clean
Whirlpool Dishwasher Filter How To Clean

Steps for Cleaning Your Whirlpool Dishwasher Filter

  1. Before you start, make sure to unplug or power off your dishwasher or shut off the breaker that supplies power to it.
  2. Next, remove the dishwasher filter. On most dishwashers, you can do this by pulling it straight out. Some filters are held in place with screws. If this is the case for your dishwasher, take a screwdriver and open the screw to remove the filter.
  3. Once the filter is out, take it outside and rinse it off with warm water. If debris or food particles are trapped in the filter, use a soft-bristled brush to scrub them away.
  4. Once the filter is clean, replace it and plug in your dishwasher or turn on the breaker.
  5. Run a cycle with hot water to wash away any leftover dirt or particles.
Dishwasher Filter how to clean
Dishwasher Filter how to clean

Tools You’ll Need for Cleaning Your Whirlpool Dishwasher Filter

The tools you’ll need for this project include

  1. A bucket
  2. Dishwasher detergent
  3. A scrub brush
  4. A screwdriver
Dishwasher Filter how to clean
Dishwasher Filter how to clean

If your dishwasher has a removable filter, start by unloading all of the dishes and pulling out the filter. If the filter is dirty, use the scrub brush to clean it off.

Next, fill up the bucket with hot water and dishwasher detergent. Place the filter in the bucket and let it soak for about 30 minutes.

After 30 minutes, use the screwdriver to remove the screws that hold the filter in place. Rinse off the filter and reattach it to the dishwasher. Put all of the dishes back in and run a cycle.

Dishwasher Filter how to clean
Dishwasher Filter how to clean

Benefits of Cleaning Your Whirlpool Dishwasher Filter

It’s important to clean your whirlpool dishwasher filter regularly to ensure optimal performance. Here’s a step-by-step guide on how to do it.

  1. First, remove the filter from the dishwasher.
  2. Next, use a small brush or toothbrush to clean off any debris or food particles.
  3. Then, soak the filter in a degreasing agent for about 30 minutes.
  4. Finally, rinse the filter off and replace it in the dishwasher.
Dishwasher Filter how to clean
Dishwasher Filter how to clean

Cleaning your dishwasher filter regularly has several benefits. It keeps your dishwasher running at peak efficiency and your appliance will long last. A clean dishwasher filter makes ensures that your dishes come out clean and sparkling every time.

It helps prolong the life of your dishwasher by preventing clogs and other mechanical issues. It prevents bad odors from building up in the dishwasher and transferring to your dishes.

How Often Should You Clean Your Whirlpool Dishwasher Filter?

We all know that regular maintenance is essential for any appliance, and your Whirlpool dishwasher filter is no exception. Routine maintenance and cleaning give you better results. It also increased the efficiency and life of the appliance.

It’s recommended that you clean your filter every month or two to avoid build-up and clogs. This will also help ensure your dishwasher is performing at its best, so you can get the most out of it.

If you notice a decrease in performance or your dishes start to come out less clean than usual. It’s probably time for a filter cleaning. During routine maintenance, make sure to also check for any debris or residue as well as bits of food or glass that may have found their way into the filter area.

Cleaning these areas regularly will ensure your dishwasher runs smoothly and efficiently.

DIY Solutions for a Clogged Whirlpool Dishwasher Filter

If your clog is severe and you don’t want to purchase a new filter, there are a few DIY solutions you can try. These are the steps you should follow.

Dishwasher Filter how to clean
Dishwasher Filter how to clean
  1. Start by removing the dishwasher filter from its housing. You’ll need to use a wrench or pliers or any other helping tool to loosen it up.
  2. Once it’s removed, check for clogs that may be easily visible. You may find bits of food or other debris.
  3. If there’s nothing visible, fill a bucket with warm water and dish liquid and submerge the filter in it for about an hour. This will help to loosen any debris that may be stuck in the small crevices of the filter.
  4. Once it’s finished soaking, use a soft scrub brush to clean any remaining debris off the filter. Then rinse with warm water until all residue is gone.

Afterward, put the filter back into its housing and secure it with screws or clips if necessary. Make sure it’s secure before turning on your dishwasher.


So there you have it, a step-by-step guide to cleaning your dishwasher filter. If you follow these simple instructions, your dishwasher will run more efficiently and your dishes will come out clean and shiny. Have any questions? Leave us a comment below.

When does the dishwasher gasket need to be removed?

You can judge the changing time of the gasket by start checking the gasket around the filter. If it’s cracked or loose, it won’t be working correctly and water won’t be able to pass through. It’s time to replace the gasket if needed.

How to remove the debris from the dishwasher filter?

Dishwasher Filter how to clean

You can remove any debris that may be clogging the filter. Firstly, remove the filter from the dishwasher This can easily be done with the help of a brush or cloth. Take the brush and gently clean all the debris and other food particles from the filter.

Why the dishwasher is not draining?

If your dishwasher is not draining properly, check the drain hose for any blockages. Maybe the hose is twisted.
Consider the equipment that is playing a vital role in the draining procedure. Check these parts may your problem is solved.
Draining pipe
Drain pump
Air gap
Drain hose
Drain Filter and sump
Blade area clogged

What happened if not using the correct type of detergent?

Make sure you’re using the right type of detergent and not too much of it. Too much detergent can create suds that block water from draining out of the dishwasher.

Why do you run the service cycle of the dishwasher?

Try running a service cycle to clear out any debris or sediment from your Whirlpool dishwasher filter. This can help restore proper drainage if there’s been a buildup of food particles or other debris around the filter screen.

Why is there water in the bottom of my dishwasher?

One of the most common reasons for water in the bottom of your dishwasher is that food particles or other debris have clogged the drain system. Check the dishwasher drain and clean the drain basket around the lower spray arm by removing debris with a wire hanger.

Is it normal for some water to remain in the dishwasher?

Dishwasher Filter how to clean

If the amount of water left in your dishwasher after a wash cycle is no more than two cups, this is normal.
Due to the principle of condensation drying, which causes water droplets in the tub, the device usually remains wet after a cycle. They are desirable here.

What to do if your dishwasher doesn’t drain?

Check for clogs.
Remove dirt from the filter.
Rate the drain hose.
Check the garbage disposal.
Clean the air gap.
Make sure the dishwasher door latch is closed.
Check the drain valve.
Test the engine.

Why is there water in my dishwasher?

The drain hose is clogged or twisted. A dishwasher drain hose connects the dishwasher to a kitchen sink drain or garbage disposal to drain the water used during a wash cycle.
If the hose is kinked or clogged with debris it can restrict water flow and you will find the dishwasher has standing water after the cycle is complete.

How do you drain a dishwasher?

To force drain your dishwasher, do the following:
Press and hold the start button for 3 seconds.
Listen for the drain noise
Wait for it to stop before checking that all the water has drained.
Repeat the process if there is still water.

What would cause a dishwasher not to drain?

There are 02 most common reasons that 80% of dishwashers won’t drain a drain pump motor clogged with solid food debris and a clogged drain hose under the sink.
Other possible causes include a clogged air gap 20% of the time, a poorly installed garbage disposal, or a damaged drain pump motor or impeller.