July 21, 2022 how do you reset a whirlpool ice maker?

How Do you Reset a Whirlpool Ice Maker

How Do you Reset a Whirlpool Ice Maker?

In this article, we discuss How do You Reset a Whirlpool Ice Maker? Ice makers are the basic need of our homes. A brief description is here for your interest. We hope you will be able to reset your ice maker easily after reading this article.

What is the ice maker?

First of all, we will know what is the ice maker? With the ice maker, you can get ice by pushing a single refrigerator button. 99% of the Refrigerators are manufactured with built-in ice makers. An ice maker is an appliance that is built into the refrigerator.

To make ice in the refrigerator is too easy. Everyone can make ice in the house in the refrigerator with no more expenses.

Nowadays, you can get an icemaker from the market except for refrigerators/only ice makers.

How Do you Reset a Whirlpool Ice Maker
How Do you Reset a Whirlpool Ice Maker

How to work an ice maker?

An ice maker works automatically, there is no need for your interference in making ice. The ice maker works with the motor. Usually, a motor, heating element, and a water valve. These things make ice collectively. The ice maker works with the timer, the timer tells to ice maker to open/activate the water valve.

Then the mold in the ice maker automatically fills with water in just a couple of seconds. And the thermostat regulates the ice-making processes. The in-built thermostat tells us about the ice is frozen. The heating element of the ice maker then activate and the heating element increases the temperature of the mold. The heated mold makes ice cube edges soft.

The motor start work and a small arm scoop out the cubes of ice in the tray. Then the ice cubes are stored in the storage bin. At the same time, the shaft raises the arm to shut off the ice-making process. So, the ice-making does not start again.

The ice-making process starts again and again if the arm does not stop it. The cycle to make ice is required 2 hours approximately.

Whirlpool Ice Maker

Whirlpool is famous and the best brand in the field of refrigeration. The ice maker is the best feature of the whirlpool. As the name, the ice maker has produced the ice automatically and nonstop. You do not need to fill the trays with water the whole process is working automatically.

How Do you Reset a Whirlpool Ice Maker
How Do you Reset a Whirlpool Ice Maker

Some the time’s whirlpool stopped to work/stop to make ice. No worries, it is not difficult to resolve. Only you need to reset the ice maker and then start non-stop ice.

Usually, you can follow 4 main methods to reset the whirlpool ice maker.

  1. Press the reset button for 2 seconds
  2. Feller arm adjustment
  3. On and off the fridge
  4. Unplug the appliance for 5 minutes

whirlpool ice maker reset button location

Here, a brief discussion is being provided about the above-said points.

Press the reset button for 2 seconds

The first method to reset the whirlpool ice maker is to press the reset button only. Usually, the reset button is situated at the bottom of the whirlpool ice maker, but in some ice makers, the reset button is on the top of the ice maker also.

How Do you Reset a Whirlpool Ice Maker
How Do you Reset a Whirlpool Ice Maker

It only depends upon the model number of the ice maker you are using. We tell you the points to reset the ice maker.

How to Reset a Whirlpool Ice Maker

  1. Find the reset button according to your model number.
  2. Usually, the reset button is located at the bottom of the ice maker.
  3. In some ice makers, the reset button is located on the top of the ice maker.
  4. When you find the button reset, press the reset button.
  5. Press the reset button for up to 2 seconds, and press it till you hear a beep tone.
  6. After reset activation check it your problem is solved.

1- Feeler Arm Adjustment

The 2nd method to reset your whirlpool ice maker is feeler arm adjustment. As the name seems that this may a complicated procedure. But this is so simple to feeler arm adjustment. Inside the ice maker, the feeler arm is just like a sensor.

It works just like a float in a toilet. The feeler arm (sensor) function is to monitor the quantity of ice making. And it sends an alert to the control when the tray is full of ice.

In the other words, the feeler arm determines and controls the ice-making procedure. When the ice tray is deemed to be full, the control board stops ice making. If the feeler arm is not working properly the ice maker stops to make the ice.

How Do you Reset a Whirlpool Ice Maker
How Do you Reset a Whirlpool Ice Maker

Sometimes the feeler arm is stuck/frozen and does not work. It can be due to less lubrication or due to frozen. Similarly, the springs or screws of the feeler arm do not work. In this situation, the ice maker stops to make ice.

Different reasons are so that the feeler arm stuck. When this situation became, just follow our tips. When you have done these steps, you will feel the sound of water that began to fill in the ice maker tank.

These steps are:

  1. Place down the feeler arm manually. With this, the ice breaks away from the feeler arm.
  2. Again, push the feeler arm down, and repeat it for some time. If the springs or screws are stuck, with this process, they will be lost or released.
  3. Power on and off the power switch.

2- Power On and off the Switch

When you are unable to find the reset button or it does not work, Also, the feeler arm. Then, you have the option to reset the ice maker through a power switch on and off. This method will also help you to reset the ice maker.

You can reset your Whirlpool ice maker by turning it off and on when it is not working:

  1. Find the on/off switch. It must be placed below the ice tray.
  2. Remove the ice tray, and if it is covered, take away that as well.
  3. Turn off the switch.
  4. After 5 minutes, turned it on again.
  5. You can place the ice tray and cover it inside the ice maker.
  6. May you solve the issue of the ice maker.
  7. If the problem still, then unplug your refrigerator/ice maker.
How Do you Reset a Whirlpool Ice Maker
How Do you Reset a Whirlpool Ice Maker

3- Unplug the Ice Maker/Refrigerator

If the above said 3 options did not work to reset your refrigerator or ice maker, this is the 4th method for reset. To reset the ice maker this method is being used. But this is very rare to power on/off an ice maker for reset purposes.

In case you own a very old model of whirlpool ice maker and refrigerator that does not have the reset button at all. Then you may have to reset your appliance through the power on/off method.

No need to worry, this very is simple. Just unplug your ice maker or refrigerator for a while and plugin it again. You will notice that after 20 seconds the refrigerator is on. Now, press the feeler arm 3 times.

For this, the feeler arm will activate the ice maker and the water starts to fill in the tank, and the ice-making process starts.

The Bottom Lines

If your ice maker still does not work and you still have not reset it, the above 4 methods are useless for you. Then, your ice maker/refrigerator has something bigger. Maybe this is an electric issue or mechanical.

Or the water valve may also be faulty. These issues that you can not resolve without the help of any professional or technician. You may also take help the inspection team of the whirlpool further.

Always, try to solve issues of home and kitchen appliances if you are qualified or you have enough knowledge about these appliances. The carelessness may result in a severe injury.

To Buy an Ice Maker visit Amazon.com

Different models of a whirlpool ice maker

  1. WRF736SDAM11
  2. ED5FVGXWS07
  3. 3ECKMF8
  4. WRF535SMBM00
  5. WRF736SDAM14
  6. 3EAD19XMWR1
  7. 3ECKMF10
  8. 1ET25DKXGW00
  9. WRF560SEHZ00
  10. WRF560SEYM05
  11. WRB322DMBM00
  12. WRS322FDAM04
  13. WRF736SDAM13
  14. WRS571CIDM01
  15. WRS571CIHZ01
  16. WRS325FDAM02
  17. WRS325FDAM04
  18. 3ECKMF86
  19. WRX735SDBM00
  20. WRF736SDAM12

FAQ’s

Q: Where is the reset button of the ice maker is situated?

Ans: The reset button of an ice maker is usually can be found at the bottom of the ice maker. There is red color on the reset button. Otherwise, you will find it on the top of the ice maker.

Q: How a whirlpool refrigerator can be reset?

Ans: The whirlpool refrigerator or ice maker can be reset through the reset button easily. You have to press the reset button for 2 to 3 seconds or until the beep tone is heard. if you can not find the reset button on your ice maker or refrigerator, simply unplug the appliance and plugin again after 20 to 30 seconds.

Q: How do I force my whirlpool ice maker to cycle?

Ans: You can force your whirlpool ice maker by using the feeler arm. The feeler arm indicates the control for starting the cycle to make ice.

Q: How to reset the whirlpool ice maker in just 4 simple steps?

Ans: Usually, you can follow 4 simple steps to reset the whirlpool ice maker.

  1. Press the reset button for 2 seconds
  2. Feller arm adjustment
  3. On and off the fridge
  4. Unplug the appliance for 5 minutes

Q: Why a whirlpool ice maker is not working?

Ans: There can be some vital issue so your whirlpool ice maker is not working. These can be:

  1. Unavailability of power supply
  2. Un availability of water in the reservoir.
  3. Water inlet valve.
  4. Due to the clogged water filter.
  5. Linked hose twisted.

Q: Why ice maker not working but water does?

Ans:  It may be due to the water filter. The water filter may be clogged. The clogged water filter restricts the water supply to the ice maker and is forced to not work as well. The water filter should be replaced after every 6 months.

 

         ——————————-  NEXT  —————————————

Samsung Refrigerator is Not Cooling

if you feel that your refrigerator is not cooling well, you should need to know a few points to find out/troubleshoot the cooling problem. Home appliances work well if you maintain these appliances well and perform a care/service from time to time.

To find out refrigerators’ problem cooling few basic tips are most important. After that, you can know the main fault of the refrigerator. If your refrigerator compressor is working and you can feel its sound of running. But there is no cooling still. Then it might be the reason for the evaporator coil or the evaporator fan. Read More…

Leave a Reply

%d bloggers like this: